Table of Contents
Advertisement
VANTAGE 549
FIGURE B.2
HIDDEN SETUP MENU FUNCTIONS
Hot start setting individually settable by mode.
Hot start will not display if not applicable.
The left display will show "Hot" and "Strt" alternately at 0.5
second intervals. The right display will show a number from 0.0
to 10.0. The default value will be 5, (Figure B.3). This setting will
be stored in system memory and will be remembered between
FIGURE B.3
machine power cycles.
Alternate CV mode selection. Default CV mode will be non-
synergic FCAW-SS (mode 6). Alternate settings will be non-
synergic GMAW (mode 5) and non-synergic FCAW-GS (mode 7).
The left display will show "CV" and "type" alternately at 0.5
second intervals. The right display will show "FC.SS"(Figure B.4),
"FC.gS"(Figure B.5) or "MIG"(Figure B.6). This setting will be
stored in system memory and will be remembered between
machine power cycles. This setting will only be visible if the
process selection switch is in the CV Wire position.
HIDDEN SETUP MENU
ACCESS PORT:
INSERT TOOL OR
PAPER CLIP
TO ACCESS
B-4
FIGURE B.4
FIGURE B.5
FIGURE B.6
OPERATION
Advertisement
Table of Contents
