Replacing Timing Belt - Woodstock SHOP FOX W1872 Owner's Manual

Model W1872 (For Machines Mfd. Since 06/20)
Replacing.Timing.Belt
If you hear unusual sounds coming from the motor or
notice that the flex-shaft rotary tool stops working, the
timing belt may be broken. If this happens, it must be
replaced before further operation to avoid damaging the
plastic motor pulley.
To.replace.timing.belt,.do.these.steps:
1. DISCONNECT MACHINE FROM POWER!
2. Remove flex-shaft rotary tool, if installed.
3. Remove three screws that secure belt cover (see
Figure.40), then remove cover.
4. Remove E-clip and flat washer from drive shaft (see
Figure.41), remove timing belt from pulleys, then
slide new timing belt onto pulleys.
5. Re-install belt cover with screws removed in Step.3,
then re-install flex-shaft rotary tool.
Figure.40. Timing belt cover screw
Timing
Belt
Figure.41. Timing belt and pulleys.
-31-
Phillips Head
Screw
Belt Cover
location.
E-Clip
Flat
Washer