Table of Contents
Advertisement
5. FAN button
Pressing this button will allow you to cycle through and set the fan speed: automatic (AUTO),
low (
), medium (
Auto
N.B.:
When you select AUTO, the unit will automatically select the most suitable fan speed according
to the factory settings.
The fan will operate at low speed in dry mode.
6. SWING button
Press this button to set the swing angle (up/down). You can cycle through and set the fan's
angle of airflow as shown below:
nessuna visualizzazione (il deflettore orizzontale si arresta nella
posizione corrente)
• When you select
will automatically tilt up and down to the maximum angle.
• When you select
The horizontal flap will stop in a fixed position.
• When you select
horizontal flap will deliver air at a fixed angle.
• Hold and press the
once you have reached the desired angle.
N.B.:
•
may not be available. When the air conditioner receives this signal, the fan will
start operating in automatic mode.
7. I FEEL button
Press this button to start the I FEEL function. The
display. When you select this function, the remote control will send the detected ambient
temperature to the indoor unit, which will then adjust its operation automatically based on the
difference between the detected temperature and the set temperature.
Press the button again to exit the I FEEL function. The
The remote control should be positioned near the user when this function is selected.
The remote control should not be placed anywhere high or low temperatures may occur
to avoid inaccurate ambient temperature detection.
V 11/15
) or high (
nessuna
visualizzazione
(il deflettore orizzontale si arresta
nella posizione corrente)
, the air conditioner will operate the fan automatically. The horizontal flap
, the air conditioner will operate the fan in a fixed position.
, the air conditioner will operate the fan at a fixed angle. The
button for 2 seconds to set the desired tilt angle. Release the button
).
Auto
no display (the horizontal flap stops in the current position)
icon will appear on the remote control
icon will disappear from the display.
8
Advertisement
Table of Contents
