Safety Instructions; Product Safety; Safety Instructions Regarding Transport And Storage; Safety Instructions Regarding Operation - Omega AOK 20SS Ex Nstallation And Operating Manual

2. Safety instructions

2.1. Product safety

Product should only be used in a technically perfect condition and in the intended, safety
and danger-aware method, taking into account the operating instructions.

2.1.1. Safety instructions regarding transport and storage

 The product must be transported and stored in its protective packaging until it is
installed.
 The product must be stored in dirt-free, moist-free and frost-free space.

2.1.2. Safety instructions regarding operation

 The pipeline system must be properly designed and installed so that the drain can be
mounted and operated without tension.
 Drain must be properly installed in the correct mounting position.
 Operate with the product only with protective equipment.
 In the event of malfunction, stop and secure the product immediately. Any fault must
be rectified immediately.
 Do not exceed max. operating pressure or operating temperature range (see
Technical data).

2.1.3. Safety instructions regarding installation, maintenance and service

 Installation and maintenance work may only be carried out by trained and
experienced staff.
 Depressurize the system before carrying out any work on the piping.
 Installation and maintenance work may only be carried out when the product is not
under pressure.
 Do not exceed max. operating pressure or operating temperature range (see data
label).
 Use original spare parts only.
 Use the product for the appropriate purpose only.
 Can be used in hazardous areas (a product does not have its own potential ignition
source)
 In case of toxic or hazardous media, the system must be completely drained before
the product is removed.
 In case the product is used with toxic or hazardous media, it must be properly
decontaminated for maintenance.

Personnel must be equipped with appropriate electrostatic conductive (dissipative)
clothing including footwear and non-sparking tools.

Only qualified personnel who pose knowledge and experience with pressurized gas
systems and ATEX applications can operate the device or perform any kind of work
related to the device.

Product must be grounded via dedicated connection.
4