Advertisement
Video Off Option : This option is for choosing the setting in which the monitor will turn off.
The default setting is "Suspend".
N/A
Doze
Standby
Suspend
Video Off Method : This determines the manner in which the monitor is blanked. The
default setting is "V/H SYNC+Blank".
V/H SYNC+Blank
Blank Screen
DPMS
MODEM Use IRQ : Name the interrupt request (IRQ) line assigned to the modem (if any)
on your system. Activity of the selected IRQ always awakens the system. The default
setting is "3".
Soft-Off by PWRBTN : Pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state. The settings are: "Delay 4 Sec.", "Instant-Off".
Wake Up Events :
VGA
LPT & COM
HDD & FDD
PCI Master
Modem Ring Resume
RTC Alarm Resume
X
Date (of month)
X
Resume Time (hh:mm:ss)
Primary INTR
►
IRQs Activity Monitoring
Move
F5: Previous Values F6: Fail-Safe Defaults
VGA : When enabled, you can set the VGA to awaken the system.
Always turn on.
During Doze mode, the monitor will be turned off.
During Standby mode, the monitor will be turned off.
During Suspend mode, the monitor will be turned off.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blank to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
OFF
LPT / COM
ON
OFF
Disabled
Disabled
0
0
0 0
ON
Press Enter
Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
Menu Level ►►
F7: Optimized Defaults
~ 37 ~
AWARD BIOS SETUP
Item Help
Advertisement
