Lanner electronics IAC-F694 Series Manual page 28

AWARD BIOS SETUP
3.3 S
TANDARD
When you select the "STANDARD CMOS SETUP" on the main program, the screen
display will appears as:
Standard CMOS Setup Screen
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
► IDE Primary Master
► IDE Primary Slave
► IDE Secondary Master
► IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Value F6: Fail-Safe Defaults F7:Optimized Defaults
The Standard CMOS Setup utility is used to configure the following components such as
date, time, hard disk drive, floppy drive, display and memory. Once a field is highlighted,
on-line help information is displayed in the left bottom of the Menu screen.
Set Date : Month, Date, Year.
Set Time : Hour, Minute and Second. Use 24-hour clock format (for p.m. time, add 12
to the hour number, e.g. you would enter 4:30 p.m. as 16:30). When you select the
"STANDARD CMOS SETUP" on the main program, the screen display will appears as:
CMOS S
ETUP
Standard CMOS Setup
Fri, Apr 6 2001
9 : 11 : 7
None
None
None
None
1.44M, 3.5 in.
None
EGA/VGA
All, But Keyboard
640K
523264K
524288K
~24~
Item Help
Menu Level ►
Change the day, month,
year and century