Advertisement
AWARD BIOS SETUP
default setting is "Disabled".
USB Keyboard Support: Set this option to "Enabled" or "Disabled" the USB keyboard/
mouse support. The default setting is "Disabled".
CPU to PCI Write Buffer: When this field is "Enabled", writes from the CPU to the PCI
bus are buffered, to compensate for the differences between the CPU and the PCI bus.
When Disabled, the writes are not buffered and the CPU must wait until the write is
complete before starting another cycle. The default setting is "Enabled".
PCI Dynamic Bursting: This item allows you to enable or disable the PCI dynamic
bursting function. The settings are "Enabled" or "Disabled".
PCI Master 0 WS Write: When enabled, writes to the PCI bus and are executed with zero
wait states. The settings are "Enabled" or Disabled".
PCI Delay Transaction: The chipset has an embedded 32-bit posted write buffer to
support delay transactions cycles. Select "Enabled" to support compliance with PCI
specification version 2.1. The settings are "Enabled" or "Disabled".
PCI#2 Access #1 Retry: When disabled, PCI#2 will not be disconnected until access
finishes. When enabled, PCI#2 will be disconnected if max retries are attempted without
success. The default setting is "Enabled".
AGP Master 1 WS Write: When enabled, writes to the AGP (Accelerated Graphics Port)
are executed with one wait states. The default setting is "Disabled".
AGP Master 1 WS Read: When enabled, reads to the AGP (Accelerated Graphics Port)
are executed with one wait states. The default setting is "Disabled".
Memory Parity / ECC Check: This item when enable detects the memory parity and error
checking and correction. The settings are "Enabled" or "Disabled".
~ 31 ~
Advertisement
