Advertisement
AWARD BIOS SETUP
Power Management :
Power Management
HDD Power Down
Doze Mode
Suspend Mode
Move
F5: Previous Values F6: Fail-Safe Defaults
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
1. HDD Power Down
2. Doze Mode
3. Suspend Mode
There are four selections for Power Management, three of which have fixed mode setting.
Disable (Default)
Min. Power Saving
Max. Power Saving
User Defined
PM Control by APM : The default setting is "Yes".
No
Yes
Note: Enable this for O.S. with APM like Windows® 98, Windows® NT, etc.
User Define
Disable
Disable
Disable
Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
No power management. Disables all four modes.
Minimum power management.
Mode
=1hr.,
Down=15min.
Maximum power management. –Only available for SL CPU's.
Doze
Mode=1min.,
Mode=1min., and HDD Power Down=1min.
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disabled.
System BIOS will ignore APM when power managing the
system.
System BIOS will wait for APM's prompt before it enter any PM
mode.
Menu Level ►
F7: Optimized Defaults
Suspend
Mode=1hr.,
Standby
~36~
Item Help
Doze Mode=1hr. Standby
and
HDD
Mode=1min.,
Power
Suspend
Advertisement
