Table of Contents
Advertisement
CHAPTER 1.
INTRODUCTION
The IAC-F695 Series is a AMD SocketA PICMG Single Board Computer (SBC) CPU card
specifically designed for Socket A processors. With VIA VT8363A/686B chipsets, IAC-F695
Series supports Ultra DMA-33/66/100 for faster hard drive transmission speeds and
contains health monitoring hardware. The health monitoring IC keeps an eye on the CPU
and releases an audio alarm when detecting abnormal operating voltage & temperature or
malfunction of the cooling fans. For boosting operation, this motivated card also supports
sockets for a Flash Disk and three DIMMs support up to 1.5GB SDRAM.
Other on-board features include two serial ports (RS-232 and RS-232/422/485), one
multi-mode parallel (ECP/EPP/SPP) port, a floppy drive controller, a keyboard interface and
a PS/2 mouse interface. The built-in high speed PCI IDE controller supports both PIO and
bus master modes. Supporting up to two floppy disks, this board also can connect up to
two IDE devices. Its 6-layer printed circuit board combined with noise-tolerant and low
power consumption CMOS technology allow the IAC-F695 Series to withstand many harsh
industrial environments.
IAC-F695 Series is a high power & full engine Single Board Computer CPU card , carefully
designed to be a feature-rich SBC CPU card at a reasonable price, this board elegantly
meets industry needs and saves time and money by waiving the hassle of going through
the extra effort and cost of additional I/O cards. Being standards-compliant, it is proved to
be a quality product with high performance and stability in a long run.
~ 1 ~
Advertisement
Table of Contents
