Table of Contents
Advertisement
AWARD BIOS SETUP
Primary INTR : When this is set to "On", any event occurring will awaken a system which
has been powered down.
IRQs Activity Monitoring :
IRQ3
(COM 2)
IRQ4
(COM 1)
IRQ5
(LPT 2)
IRQ6
(Floppy Disk)
IRQ7
(LPT 1)
IRQ8
(RTC Alarm)
IRQ9
(IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12
(PS/2 Mouse)
IRQ13
(Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
á â à Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults
The following is a list of IRQ's Interrupt ReQuests, which can be exempted much as the
COM ports and LPT ports above can. When an I/O device wants to gain the attention of
the operating system, it signals this by causing an IRQ to occur. When the operating
system is ready to respond to the request, it interrupts itself and performs the service.
When set "Enabled", activity will neither prevent the system from going into a power
management mode nor awaken it.
l IRQ3
(COM 2)
l IRQ4
(COM 1)
l IRQ5
(LPT 2)
l IRQ6
(Floppy Disk)
l IRQ7
(LPT 1)
l IRQ8
(RTC Alarm)
l IRQ9
(IRQ2 Redir)
l IRQ10 (Reserved)
l IRQ11 (Reserved)
l IRQ12 (PS/2 Mouse)
l IRQ13 (Coprocessor)
l IRQ14 (Hard Disk)
l IRQ15 (Reserved)
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
~38~
Item Help
Menu Level
F7: Optimized Defaults
Advertisement
Table of Contents
