Chipset Features Setup - Lanner electronics EM-568 Series User Manual

3.5 Chipset Features Setup

When you select the CHIPSET FEATURES SETUP on the main program, the screen display will appears as:
Chipset Features Setup Screen
Spread Spectrum
DRAM Timing By SPD
Memory Hole
P2C/C2P Concurrency
System BIOS Cacheable
Video RAM Cacheable
Frame Butter Size
AGP Aperture Size
AGP-4X Mode
AGP Driving Control
X AGP Driving Value
Panel Type
CPU to PCI Write Buffer
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI#2 Access #1 Retry
AGP Master 1 WS Write
AGP Master 1 WS Read
Move
Spread Spectrum: When the system clock generator pulses, the extreme values of the pulse generate excess
EMI. Enabling pulse spectrum spread modulation changes the extreme values from spikes to flat curves, thus
reducing EMI. This benefit may in some cases be outweighed by problems with timing-critical devices, such as a
clock-sensitive SCSI device.
DRAM Timing By SPD: This item allows you to select the value in this field, depending on whether the board
has paged DRAMs or EDO (extended data output) DRAMs.
Memory Hole: In order to improve performance, certain space in memory can be reserved for ISA cards.
This memory must be mapped into the memory space below 16MB.
P2C / C2P Concurrency: This item allows you to Enable or Disable the PCI to CPU, CPU to PCI concurrency.
The default setting is Enabled .
User's Manual
Phoenix - Award BIOS CMOS Setup Utility
Advanced Chipset Features
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[8M]
[64M]
[Enabled]
[Auto]
[DA]
[1024 768 TFT 65Mhz]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
Enter: Select +/-/PU/PD: Value F10: Save
F5: Previous Values
Menu Level
Esc: Exit
F7: Optimized Defaults
Chapter 3 BIOS Setup
Item Help
F1: General Help
35