Lanner electronics EM-568 Series User Manual page 36

Chapter 3 BIOS Setup
Halt On: During the power-on-self-test (POST), the computer stops if the BIOS detect a hardware error. You
can tell the BIOS to ignore certain errors POST and continue the boot-up process. These are the selections:
No errors
All errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
32
Whenever the BIOS detects a non-fatal error the system will not be
stopped and you will be prompted
The system boot will be stopped for any error that may be detected.
The system boot will not stop for a keyboard error; it will stop for all
Other errors.
The system boot will not stop for a disk error; it will stop for all other
Errors.
The system boot will not stop for a keyboard or disk error; it will stop
for all other errors.
User's Manual