Operation; Control Panel - Geberit MONOLITH PLUS User Manual

Operation

Control panel

Using the Geberit Monolith Plus
When a user approaches the sanitary module, the orientation light
lights up and the odour extraction unit starts up. To release a flush,
press the <Large flush volume> actuator button for a large flush or
the <Small flush volume> actuator button for a small flush.
The button functions may be temporarily blocked due to
high electrostatic discharges.
If the odour extraction unit indicator light permanently lights
up red, the filter must be replaced. → See "Replace the
filter", page 29.
Starting or stopping the odour extraction unit
▶
Press the <Odour extraction> button.
✓
The odour extraction unit starts or stops. While the
odour extraction unit is running, the odour extraction unit
indicator light blinks slowly.
The odour extraction unit shuts off automatically after
10 minutes (factory setting).
1 Orientation light
2 Odour extraction unit indicator light
3 <Small flush volume> button
4 <Large flush volume> button
5 <Odour extraction> button
EN