Table of Contents
Advertisement
Quick Links
Read the Information for Use and the Safety Instructions
carefully. Subject to modification without prior notice.
Typographical and other errors do not justify any claim for
damages. Modification of the product is prohibited.
This manual is designed for electricians, system administrators,
and product users.
All product names and trademarks mentioned in this manual are
trademarks of their respective owners.
Except for internal use, relinquishment of the instructions to a
third party, duplication in any type or form - also extracts - as
well as exploitation and / or communication of the contents is not
permitted.
Downloads and more information at:
www.ecue.com
AM255360031, AM305660031, AM305690031
SYMPL pro Node (e:pix)
Edition:
30.06.23 [EN_SYMPL_pro_Node_Setup_v2p0]
Published by:
Traxon Technologies Europe GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2023 Traxon Technologies Europe GmbH
All rights reserved
Traxon Technologies Europe GmbH
Sales Operations
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com
e:cue
Information for Use
Advertisement
Table of Contents
Related Manuals for Traxon e:cue SYMPL pro Node
Summary of Contents for Traxon e:cue SYMPL pro Node
- Page 1 33100 Paderborn, Germany All product names and trademarks mentioned in this manual are trademarks of their respective owners. ©2023 Traxon Technologies Europe GmbH Except for internal use, relinquishment of the instructions to a All rights reserved third party, duplication in any type or form - also extracts - as well as exploitation and / or communication of the contents is not permitted.
- Page 2 Network configuration with the web interface Extended DMX/RDM settings Test mode Test mode via Test button Test mode via web interface Firmware Update Dismounting Product specifications Certifications Dimensions WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 06/23 Sheet: 02 / 14...
-
Page 3: Security Instructions
(e.g. SELV, Class 2). content — If safety instructions are missing, please contact Traxon e:cue to receive a new copy. General device description e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT only. They provide various connection types like DMX/RDM, DALI, digital inputs and outputs etc. - Page 4 3.0 or higher or a Lighting Application Suite version 7.0 SR2 or higher is mandatory. — e:cue SYMPL Noes are not hot-pluggable. Delivery content Delivery content of the e:cue SYMPL pro Node (e:pix) - Product number AM255360031, AM305660031, AM305690031 SYMPL pro Node (e:pix) Safety instructions...
-
Page 5: General Remarks
Keep the packaging for use in case of further transport. Inspect all parts for completeness regarding chapter “2.1 Delivery content” (page 04). If there is apparent damage to the device or parts are missing from the delivery scope, please contact the Traxon e:cue support service. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. -
Page 6: Installation
— Before dismounting, appropriate measures must be taken to protect the respective components against damage caused by electrostatic discharge (ESD protection). — Do not try to repair the device. Return it to your Traxon e:cue distributor for replacement or repair. To update the firmware see „8 Firmware Update“... - Page 7 (optional for indoor only). Ground each cable seperately. Power supply The e:cue SYMPL pro Node (e:pix) can be powered by an external power supply or via Power-over-Ethernet. PoE: For PoE, simply connect an Ethernet connection from a power sourcing device.
-
Page 8: Network Configuration
Ground each cable separately. Network configuration The configuration of the e:cue SYMPL pro Node (e:pix) is completely done via e:cue SYMPHOLIGHT. See the SYMPHOLIGHT System Manual for details on configuration, available at www.ecue.com. The network properties of the device are preconfigured. The successful installation of the power supply is required for changing the network configuration. - Page 9 Entering an empty value disables the password protection. Click “Submit” to apply the settings. The network configuration of the device is completed. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 06/23 Sheet: 09 / 14...
- Page 10 By assigning a Group ID to multiple SYMPL pro Nodes (e:pix), the content of all identically assigned SYMPL pro Nodes (e:pix) is captured and likewise displayed on these devices. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 06/23...
-
Page 11: Test Mode
To access the web interface, open a common web browser on a connected PC. Enter the SYMPL pro Node (e:pix)'s IP address into the address bar: e.g. http://192.168.123.1. WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 06/23 Sheet: 11 / 14... -
Page 12: Firmware Update
Dismounting Disconnect all attached cables. Dismount the e:cue SYMPL pro Node (e:pix) from the rail by pulling the black DIN rail handle and unhitching the SYMPL Node. The dismounting is completed. Before dismounting, appropriate measures must be taken to protect the respective components against damage caused by electrostatic discharge (ESD protection). -
Page 13: Product Specifications
*) 70 °C / 158 °F for max. 1 hour/day; continuous operation at max. 60 °C / 140 °F. 1) e:cue SYMPL pro Node 2) e:cue SYMPL pro Node with CE only 3) e:cue SYMPL pro Node e:pix WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. - Page 14 Conforms to UL Std. 62368-1 4000805 Certified to CSA Std. C22.2 NO. 62368-1 12 Dimensions All dimensions in mm content 48.5 Please check for the latest updates and changes on the Traxon website. © 2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED. www.traxon-ecue.com...
Need help?
Do you have a question about the e:cue SYMPL pro Node and is the answer not in the manual?
Questions and answers