Dimplex Optimyst 3STEP-RGB-EU Operating Instructions Manual page 9

CHOOSING AND SETTING A TIMER SCHEDULE.
User Timer - To re-programme the factory default Timer Modes: with the remote control activated, navigate UP/DOWN
button to user timer
1. Press Enter when
2. Press once EDIT icon blinks then press Enter
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday
Day 2 = Tuesday
Day 3 = Wednesday
Day 4 = Thursday
Day 5 = Friday
Day 6 = Saturday
Day 7 = Sunday
3. Press to navigate to the desired day and Press Enter to Select
4. P1 will be displayed on screen
5. Press Enter to select P1,or to navigate to P2, P3 or P4 press
6. ON will be displayed
7. Press or to adjust the ON Hour time, press Enter to Confirm
8. Press or to adjust the ON Minute time, press Enter to Confirm
9. Press or to adjust the Temperature setting, press Enter to Confirm
10. OFF will be displayed
11. Press or to adjust the OFF Hour time, press Enter to Confirm
12. Press or to adjust the OFF Minute time, press Enter to Confirm
Press Enter to modify Programme P2, follow steps 5-12, Press
Press Enter to modify Programme P3, follow steps 5-12, Press
Press Enter to modify Programme P4, follow steps 5-12
To copy newly programmed P1-P4 heating programmes to other days, press and hold ADV button COPY will be
displayed then navigate UP/DOWN buttons to other days, while the day flashing press and hold ENTER button to
paste, PASTE will be displayed to confirm the setting.
Press BACK button user timer screen is displayed, navigate UP/DOWN button to flash ON and press ENTER to
confirm the user timer setting. During this setting product will turn off and turn on for the time you selected.
To turn off the User timer, activate the remote control by pressing the ENTER button, heater OFF time will be
displayed, press the MENU buton which takes to home screen, navigate to
once while OFF blinks press ENTER to confirm. Now the timer is turned OFF which is incated by one beep sound.
is blinking
and press Enter to select
to skip to P3
to Skip to P4
and press ENTER, ON blinks, press
9