Modes Of Operation - Dimplex Optimyst 3STEP-RGB-EU Operating Instructions Manual

SETTING THE DATE AND TIME
To set the date and time on the heater; with the remote control activated navigate UP/DOWN button to Date & Time icon
1. Press Enter when the
2. Press and to set the Hour, press Enter
3. Press and to set the Minutes, press Enter to confirm the time
4. Press and to set the Day, press Enter
5. Press and to set the Month, press Enter
6. Press and to set the Year, press Enter to confirm the year
7. Press and to select ON/OFF for the Daylight saving time, press Enter to confirm and returns to home screen.

MODES OF OPERATION

MANUAL MODE (HEAT ON CONSTANT)
to the temperature you have set the remote control to. Note: This mode ignores the User Timer and maintains the
displayed temperature.
1. Press Menu Button
2. Press or to highlight the
3. Press Enter to Confirm
4. Use and to adjust to the desired room temperature. Note the default temperature setting is 21°C and the
maximum temperature set point on the product is 30°C.
5. To turn Heat OFF, Press the Menu
Enter to select.
6. While in Manual mode menu (Temp displayed as below) the user can choose between HI/LO heat output by
pressing the Advance button
THERMAL SAFETY CUT-OUT
A thermal safety cut-out is incorporated in the fan heater to prevent damage due to overheating. This can happen if
the heat outlet was restricted in any way. If the cut-out operates, unplug the heater from the socket outlet and allow
approximately 10 minutes before reconnecting. Before switching the heater back on remove any obstruction that may
be restricting the heat outlet, then continue normal operation.
TIMER SCHEDULE MODE
day and these can be customised for each day of the week.
is blinking
: Select to choose a constant heat mode. This mode heats the room
symbol
or Back button, then use
followed by or
: Provides greatest flexibility to the user. Four times slots are available throughout the
or to highlight the
to highlight and Enter to select.
8
symbol and press