H O W To U S E Th E W Ave Fo Rm G E N Era To R (O P Tio N A; C O N N Ect Th E O U Tp U T; S Et Th E W Av Efo Rm - VOLTCRAFT DSO-2202H + AFG Quick Manual

5 . H o w to U s e th e W ave fo rm G e n e ra to r (o p tio n a l)
The instrument can provide 4 basic waveforms, sine wave, square wave,
ramp wave, pulse wave, and 8 arbitrary waveforms.
C o n n e c t th e o u tp u t
Press the M o d e button to switch the instrument interface to the waveform
generator function interface. Check whether the upper left corner of the
screen is O N , if it is O F F , press the R u n /S to p key to switch.
Connect the BNC cable to the port marked G E N O u t in the top of the
oscilloscope.
To observe the output of the waveform generator, connect the other end of
the BNC cable to the signal input connector of the oscilloscope.
S e t th e w ave fo rm
(1) Press the M o d e button to switch the instrument interface to the waveform
generator function interface.
F 1
(2) Press to select the desired waveform, and the screen will display
the corresponding waveform setting menu.
(3) Set the parameters of the desired waveform through the operation panel
F2-F4 and the
Generator Output Ports
panel keys.
15