General Cleaner Operation - Polaris 7000 Owner's Manual

Page 8
X
4. For products with caddy included, see separate caddy assembly sheet.
Figure 4. Caddy (Optional)
5. Plug the control unit directly into a GFCI outlet. DO NOT use an extension
cord.
NOTE: To avoid damaging the power cable, do not try to twist
the entire cable housing (see below).
NOTE: To avoid exposing the power cable connector pins to water, be sure the connector is
X
screwed in all the way and there is no gap. (see below).
X
4

General Cleaner Operation

To prevent damage to the cleaner, be sure to adhere to the following guidelines:
• Remove the cleaner from the pool after the cleaning cycle is completed.
• Store cleaner out of direct sunlight or inclement weather.
• Never lift the cleaner out of the pool by the floating cable.
• Take additional care when lifting the cleaner out of the pool. It becomes heavier when
filled with water.
• Always remove the cleaner from pool before super chlorinating or adding acid.
• Do not handle cleaner while it is in operation.
X
X
CAUTION
X
X
X