32
Settings
Settings
Setting a device passcode
You can set a device passcode to protect your headset from unauthorized access. Your headset
prompts you to enter the passcode when you do one of the following:
§ Restart the headset.
§ Turn on the headset when the power is off.
§ Put the headset back on and wake it up from sleep mode.
You can adjust sleep mode settings in Settings Advanced.
Here's how to set your device passcode:
1.
In the headset, go to Settings Advanced Security settings.
2.
Select Set next to Device lock.
3.
Enter a four to eight-digit passcode.
4.
Enter the passcode again to confirm it.
To disable the passcode, select Disable next to Device lock.
Connecting to a Wi-Fi network
VIVE Focus 3 allows you connect to 2.4 GHz and 5 GHz Wi-Fi networks.
VIVE Focus 3 also supports the Wi-Fi 6E standard. VIVE Focus 3 can be connected to 6 GHz
wireless networks in regions where the headset is certified to use Wi-Fi 6E.
§ Currently, VIVE Focus 3 can only use Wi-Fi 6E in select regions. Because Wi-Fi 6E is still a
new standard, availability and channels will be dependent on local legislation in your country.
For details, see
In what regions can Wi-Fi 6E be used?
§ Before VIVE Focus 3 can detect 6 GHz wireless networks, you need to connect the headset to
a 2.4 GHz or 5 GHz network first. You can then scan for 6 GHz networks to connect to.
Here's how to connect the headset to a Wi-Fi network:
on page 55.