Edirol UA-1D Owner's Manual page 31

• Is a digital device such as an MD connected to the digital output of
the UA-1D?
Depending on your application, playing audio with a digital device such as an
MD connected to the digital output of the UA-1D may cause a certain amount
of time to be required for the digital audio output to be locked immediately
after playback, so that there will be no sound for one or two seconds. If this
occurs, you can use the D-Out Smoother software from the included
CD-ROM to make audio play smoothly. For details, refer to Installing and
Using the D-Out Smoother (p. 19).
• Are you running multiple applications?
If multiple applications are running simultaneously, an error message may
appear. If this occurs, click [OK], and close the other applications.
Even if an application window is closed, it is still running if it remains in the
taskbar, so be sure to quit any unneeded applications shown in the taskbar.
• Have you specified the audio data output destination for OS?
The audio data output destination for a computer must be set to UA-1D. For
details on this setting, refer to Specifying the audio input/output device
(Windows p. 15) or Making the sound settings (Macintosh p. 24).
• Have you specified the audio data output destination for your
playback software?
For some software, you must set the audio data output destination as UA-1D.
For details on this setting, refer to the owner's manual for the software.
• Have the drivers been installed correctly?
In order to playback audio data using the UA-1D, the USB Audio Device
driver must be installed. For details on installation and settings, refer to
Connections and driver installation (Windows p. 10, Macintosh p. 22).
• Are the various Volume Control faders raised?
Adjust the volume of each fader as described in Volume Control settings
(Windows p. 17) or Making the sound settings (Macintosh p. 24).
Sound is distorted
• Is the volume level of the instrument connected to LINE IN too
high?
Use the Line input adjustment slider of the UA-1D to reduce the input level.
Troubleshooting
31