Using an external device as the master
In the setup shown here, the hard disk recorder or other external device is the master, and the UA-1000 is the
slave.
fig.synchro-slave
Hard disk recorder, etc.
● Connections
Connect your external device (e.g., hard disk recorder) to the WORD CLOCK IN jack.
● Sampling frequency select switch
Set this to the same sampling frequency as selected for the master device.
● External clock switch
Turn this on (lit) so that the UA-1000 will synchronize to the digital signal input to the WORD CLOCK IN
connector (i.e., the UA-1000 will be the slave).
Set the sampling frequency
Match the sampling frequency of
the master device
Basic connections and settings
WORD CLOCK
IN
ON (lit)
35