Advertisement
P/N 95B-6143-00 (JULY 2023)
Page 10
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
Pinnacle 45 Direct-Reading Deployment Guide
Set the Schedule tab to use Interleaved, ping as fast
as possible, and Number of pings to 1.
If data will be collected with VmDas, the Water
profile, Narrowband profile, and Bottom track pings
must be set to 1.
This is the default setting when the Vessel
Mount Wizard is selected.
Click the Change button on the Output tab.
Use this screen to set up the Input and Output
triggers if needed.
Click OK to save the setting.
The coordinate system is set to Beam, but
VmDas will set the EX command and data is recoded
externally to the working folder (i.e. no data is
recorded on the internal recorder (SD card)).
View the Storage required consequence and verify
the computer used to collect data has sufficient hard
disk space.
Storage required is shown for one day.
Click Save and save the command file.
The command file will save to the working folder
by default.
Advertisement
