CONTROLS
OVEN FUNCTION CONTROL
The oven function control is used to select the different functions. Each is explained in detail further in the
manual. To select a function, turn the control knob to the desired oven function and then set the
temperature with the thermostat control.
OVEN THERMOSTAT CONTROL
The oven thermostat control is used to select the desired temperature for cooking. When the temperature
inside your oven reaches the value set, the thermostat will cut the circuit and the thermostat light will go
off. When the temperature falls below the set value, the thermostat will again be turned o n alongside the
thermostat light. It is normal for this to occur during the cooking process, particularly when the door has
been opened.
OVEN TIMER CONTROL
The oven timer control is used to either set the oven into manual mode (no timer) or set up a timer
between 0 and 90 minutes.
In manual mode, the oven runs without a timer. Rotate the timer control anti‐clockwise from off (0) to the
first icon. To stop the oven running, turn the knob back to off.
To set a timer, rotate the timer clockwise to the desired time and the oven will run until the control knob
reaches off, at which point the oven will stop running. The timer can be adjusted at any point during
operation.
OO640X
OO650X
10