Huawei SUN2000-100KTL-M2 User Manual page 103

SUN2000-(100KTL, 110KTL, 115KTL)-M2
User Manual
No. Parameter
3 Maximum apparent
power (kVA)
4 Maximum active
power (kW)
5 Shutdown at 0%
power limit
6 Active power
change gradient
(%/s)
7 Derated by active
power % (0.1%)
8 Active power
derating in
absolute power
(kW)
9 Reactive power
change gradient
(%/s)
10 Reactive power
adjustment time
(s)
11 Power factor
12 Reactive power
compensation
(Q/S)
Issue 07 (2023-04-30)
Description
Specifies the output upper
threshold for the maximum
apparent power to adapt to the
capacity requirements of standard
and customized inverters.
Specifies the output upper
threshold for the maximum active
power to adapt to different
market requirements.
If this parameter is set to Enable,
the inverter shuts down after
receiving the 0% power limit
command. If this parameter is set
to Disable, the inverter does not
shut down after receiving the 0%
power limit command.
Specifies the change speed of the
inverter active power.
Adjusts the active power output
of the inverter by percentage.
Adjusts the active power output
of the inverter by fixed value.
Specifies the change speed of the
inverter reactive power.
Specifies the adjustment time for
the reactive power to reach the
target value during reactive
power adjustment.
Specifies the power factor of the
inverter.
Specifies the reactive power
output by the inverter.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
If the maximum active power
equals the value of
Smax_limit, this parameter is
not displayed.
-
-
-
If this parameter is set to 100,
the inverter outputs based on
the maximum output power.
-
-
-
-
-
96