Installation; Cutout Dimensions; Custom Door Panel (For Panel-Ready Models); Electrical Requirements - Bertazzoni Professional Series Installation Manual

INSTALLATION

CUTOUT DIMENSIONS

Cabinet depth shown includes kitchen cabinet front panel.
For a flush installation, a minimum inset depth of 22 1/2"
(570) is required with a custom door panel thickness of 3/4"
(20).
TOP VIEW
FRONT VIEW
• B 17 ¾" (450mm)* or 18" (457mm)**
* without side trims
** with side trims installed
10
25"
635
B
SIDE VIEW
• C 32 7/16" - 34 7/16" (824mm-874mm)
CUSTOM DOOR PANEL (FOR PANEL-READY
MODELS)
Fig. 2
The thickness of the custom panel may vary. A minimum 1/
2" (13 mm) thick panel is required, but the thickness can be
increased provided the panel does not exceed 13 lb (6 kg).
The custom door panel template provided accommodates
25" 5/16 (592 mm) – 23" 7/16 (596 mm) wide panels.
FRONT VIEW
Fig. 3
23 5/16"- 23 7/16"
• D 17 3/8" - 17 9/16" (442mm-446mm)

ELECTRICAL REQUIREMENTS

Please check the electrical standards and local codes
before installing the appliance.
Connect to a properly rated, protected, and sized power
supply circuit to avoid electrical overload. The dishwasher
is designed for an electrical supply of 120 V (volts), 60 Hz
(hertz), AC, connected to a separate, properly-grounded
electrical circuit servicing only this appliance, with a fuse or
C
D
592-596
Fig. 4
Fig. 5