Table of Contents
Advertisement
Machine Operation
Pre-Run Inspection
Perform a pre-run inspection to find possible problems
that could cause poor performance or lost time from
breakdown. Check the rating plate to confirm voltage
and frequency is the same as the power supply. NOTE:
A 10% variation in voltage is acceptable.
Starting Machine
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make sure
that all covers are in place and secured properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. Set black on/off switch to "on" position.
4. Press green button to start brushes.
After applying a light spray of diluted interim carpet
cleaner onto the carpet using a pressurized tank
sprayer, commence cleaning by pushing and pulling
the machine slowly over the wetted carpet.
Starting Machine
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make sure
that all covers are in place and secured properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. Set black on/off switch to "on" position.
4. Press green button to start brushes.
5. Press and hold blue button to spray chemical.
Once machine is plugged in spray function is oper-
ational.
Apply a light spray of diluted interim carpet cleaner onto
the carpet using the onboard spraying system. Spray
chemical while pushing the machine forward. Brush
the chemical into the carpet while pulling the machine
slowly over the wetted carpet. Move the machine in
multiple directions and overlapping strokes.
Flammable materials can cause an explosion or fire.
Do not use flammable materials with this machine.
86338690 BRS 43/500 C
Operations
11
Advertisement
Table of Contents
