Changing The Fuses Of Individual Electrical Power Consumers - KTM 250 EXC SIX DAYS TPI 2022 Owner's Manual

15 ELECTRICAL SYSTEM
15.5
122
S04883-11

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
S03498-10
–
Mount the EFI control unit
Finishing work
–
Mount the seat. ( p. 78)
Preparatory work
–
Remove the seat. ( p. 78)
Main work
–
1
Open fuse box cover .
–
Remove the faulty fuse.
Guideline
(All EXC models)
Fuse 1 - 10 A - EFI control unit, lambda sensor, oil
pump, combination instrument, electronic fuel injection,
diagnostics connector
Fuse 2 - 10 A - horn, brake light, radiator fan (optional),
turn signal (optional)
Fuse 3 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 4 - 5 A - fuel pump
(All XC‑W models)
Fuse 1 - 10 A - EFI control unit, oil pump, combination
instrument, electronic fuel injection, diagnostics con-
nector
Fuse 2 - 10 A - radiator fan (optional)
Fuse 3 - 10 A - low beam, position light, tail light
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
1 2
on the rubber lugs .
A
.