Checking The Gear Oil Level - KTM 250 EXC SIX DAYS TPI 2022 Owner's Manual

18.5

Checking the gear oil level

Info
The gear oil level must be checked when the engine is cold.
–
Position the frame protector.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Mount the cable ties.
S04901-10
Finishing work
–
Install the air filter box cover. (
–
Install the fuel tank.
–
Add 2-stroke oil. (
–
Prime the oil pump.
–
Mount the seat. (
–
Install the main silencer. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
–
Detach the foot brake lever spring.
–
Remove gear oil level monitoring screw
–
Check the gear oil level.
A small quantity of gear oil must run out of the drilled hole.
» If no gear oil runs out:
–
Add the gear oil.
–
Mount and tighten the gear oil level monitoring screw.
E00912-10
Guideline
Screw, gear oil level
monitoring
–
Attach the foot brake lever spring.
SERVICE WORK ON THE ENGINE 18
1
with washer.
M5 5 Nm (3.7 lbf ft)
p. 79)
( p. 85)
p. 49)
( p. 142)
p. 78)
p. 82)
1
.
( p. 149)
M6 8 Nm (5.9 lbf ft)
p. 64)
147