Operate The Appliance With The Remote Control - Bellfires Smart Bell 60 MF User Manual

Operation
4.3

Operate the appliance with the remote control

4.3.1 Operate the appliance with the remote control
Table 1: Start and stop the appliance
Action
Start the appliance
with one-button opera-
tion
Start the appliance
with two-button opera-
tion
Start the appliance
from stand-by mode
Stop the appliance
Table 2: Set the appliance to different modes
Action
Set the appliance to
stand-by mode
Start the child proof
mode
16
Preconditions Steps
The remote control is
set to the one-button
Push
operation. Refer to
4.2.1
section .
The remote control is
set to the two-button
Push
operation. Refer to
at the same time
4.2.1
section .
The appliance is set to
stand-by mode.
Push and hold
Push
Preconditions Steps
Push and hold
until only the pilot light
burns
Push
at the same time
Result
• You hear a short
beep.
and
• You can use the re-
mote control when
the main screen
shows
Result
You can only use the off
and function of the remote
control.
Smart Bell 65-60