Changing How Memory Numbers Are Indicated - Boss Drive Zone OD-20 Owner's Manual

Changing How Memory Numbers Are Indicated

Not only can you confirm the currently selected memory merely by checking the lit
MEMORY Number indicators, you can also change the pattern in which the
indicators light up. Select the pattern that provides the easiest way to check the
memory in any particular environment.
When using the OD-20 in dimly lit surroundings, you can confirm
memory numbers more easily by using the Lighting Pattern 2 setting.
Lighting Pattern 1 (Normal):
Only the indicator for the selected memory lights up (or blinks).
Lighting Pattern 2:
The number of indicators lighting up (or blinking) corresponds to the selected
memory number.
When MEMORY 1 is selected: Indicator 1 lights up.
When MEMORY 2 is selected: Indicators 1 and 2 light up.
When MEMORY 3 is selected: Indicators 1, 2, and 3 light up.
When MEMORY 4 is selected: Indicators 1, 2, 3, and 4 light up.
You can select the indicator lighting pattern by means of the following procedure.
1. Disconnect the connection plug from the INPUT jack to switch off the power.
2. While holding down the MEMORY WRITE button and the MEMORY SELECT
button, insert the connection plug into the INPUT jack to switch on the power.
When the button is released, either the No. 1 indicator alone blinks, or all
indicators from 1 through 4 blink.
3. Press the MEMORY SELECT button to set the MEMORY indicator lighting
pattern.
Lighting Pattern 1: Indicator 1 alone blinks.
Lighting Pattern 2: Indicators 1–4 all blink.
4. Press the MEMORY WRITE button.
After the MEMORY Number indicator(s) begins blinking rapidly, the setting is
stored in memory and the unit returns to its ordinary state.
* To cancel the setting change, operate the EFFECT ON/OFF pedal or the MANUAL/
MEMORY pedal before pressing the MEMORY WRITE button. The unit will return to
its ordinary state.
19