Changing And Storing The "Memory" Sound - Boss Drive Zone OD-20 Owner's Manual

Operation

Changing and Storing the "MEMORY" Sound

1. Press the MANUAL/MEMORY pedal or the MEMORY SELECT button to
change to the "MEMORY" sound.
2. Operate the knobs to change the sound.
* To avoid sudden inadvertent changes in sound, the DRIVE, BOTTOM, TONE, LEVEL,
ATTACK SHAPE, and HEAVY OCTAVE knobs are designed so that the setting does not
change unless the knob is first turned as far as the stored setting value. Once the position of
the knob matches the setting value stored in memory, the sound starts to change.
When a setting changes, the MEMORY indicator blinks automatically.
fig.15
3. Press the MEMORY WRITE button.
The MEMORY indicator and the indicator for the currently selected MEMORY
number start to blink, and the OD-20 is put into write standby.
fig.16
Lit
12
Do not switch off the power while a write operation is in progress.
Blink
Write standby
Blink
Blink