Yealink T57W Quick User Manual

YEALINK T57W
QUICK USER GUIDE

USING BASIC CALL FUNCTIONS

PLACING A CALL USING THE HANDSET

1. Pick up the handset.
2. Enter the number, and then tap Send.

USING THE SPEAKERPHONE

1. With the handset on-hook, press
2. Enter the number, and then tap Send.

USING THE HEADSET

1. With the headset connected, press
headset mode.
2. Enter the number, and then tap Send.
Note: During a call, you can alternate between the headset, hands-
free speakerphone and handset modes by pressing the HEADSET
key, the Speakerphone key or by picking up the handset. Headset
mode requires a connected headset.

ANSWERING A CALL USING THE HANDSET

Pick up the handset.
USING THE SPEAKERPHONE
Press .
USING THE HEADSET
Press .
Note: You can reject an incoming call by pressing the Reject soft key.
.

ENDING A CALL USING THE HANDSET

Hang up the handset or tap End Call.
to activate the
USING THE SPEAKERPHONE
Press
USING THE HEADSET
Tap End Call.
or End Call.

REDIALING A CALL

• Press to enter the Placed Calls list, and then tap the
desired entry.
• Press twice when the phone is idle to dial out the last
dialed number.

MUTING AND UN-MUTING A CALL

Press to mute the microphone during a call.
Press again to un-mute the call.

TO HOLD A CALL

Press or Hold during an active call.

TO RESUME THE CALL, DO ONE OF THE FOLLOWING

• If there is only one call on hold, press
• If there is more than one call on hold, select the desired
call, and then press or Resume.
SMARTCITYMETRO.COM
or Resume.