Inserting Blank Measures (Insert) - Roland MT-300S Owner's Manual

5.
Rotate the [Dial] to select the segment to be deleted.
6.
Using the Beat [ ] or Tempo [ ] buttons, move the cursor ( ) to the
left side of the lower part of the screen.
7.
With the [Dial], select the number of the track button or part to be
deleted.
If you select "All," all parts in the same interval are deleted.
Pressing the [Song] button at this point cancels the settings and returns you to the Edit
screen.
8.
When all of the settings are finished, press the [Transpose] button.
Deletion then begins.
When deletion is finished, you are returned to the Edit screen.
fig.49-3_40
Were measure 3 to be deleted...
Measure 1

Inserting Blank Measures (Insert)

You can insert blank measures in a performance at locations you specify. This is called
"insert."
fig.49-1_40
Phones
Press the [Song] button to display the Basic screen.
1.
Press the [Edit] button.
The Edit screen is displayed (p.15).
2.
Press the Beat [ ] or Tempo [ ] buttons until "Insert" appears in the
upper part of the screen.
3.
Press the [Transpose] button, and the following screen will appear:
fig.50-1_30
2
A B
A
B
Power Marker Clear Song
On Off
R
Volume
Track
3 4
C D
D
2, 4, 6 3, 8
Beat Tempo Transpose
Enter
1 2 3 4
Track Count In Metronome
Editing Functions
Reverb
Edit
Sound
1 5, 7
87