If You See This Screen Displayed - Roland MT-300S Owner's Manual

If You See This Screen Displayed

Indication: PU
Meaning : When a song with a pickup (a song that does
not start on the first beat) is played back, the
measure numbers will be indicated in the dis-
play as PU, 1, 2, and so forth.
Indication: New Song Del OK?
Meaning : When you try to delete a recorded song (p.48),
to select a different song after recording a song
(p.26) or to select a different song after editing
the basic settings of a song, this is shown in the
display (p.27, 41).
Indication: Setup Modified Up date OK?
Meaning : This is shown in the display when you edit the
settings in each Part, then try to select a differ-
ent song without changing the basic settings
(p.58).
Indication: E.00:CopyProtect
Meaning : To protect the copyright, this music file cannot
be saved onto a different floppy disk than the
original one.
Meaning : To protect the copyright, this music file cannot
be saved as an SMF.
Indication: E.01: Can't Save
Meaning : This music file cannot be saved onto a floppy
disk.
Indication: E.02: Protected
Meaning : The protect tub on the floppy disk is set to the
Protect position. Change it to the Write posi-
tion (p.5).
Indication: E.03: Master Disk
Meaning : This floppy disk cannot store the format.
Indication: E.04: Can't Save
Meaning : The data cannot be saved onto this floppy disk
because the saving system is different. Use the
floppy disk that has the save saving system.
Indication: E.05: Read Only
Meaning : A new song cannot be written on this song.
Select a different song number or use a differ-
ent floppy disk.
Meaning :This song cannot be deleted.
Indication: E.10: No Disk
Meaning : No floppy disk is connected to the disk drive.
Indication: E.11: Disk Full
Meaning : There is not sufficient space left on the floppy
disk for the data to be saved. Save the data
onto a different floppy disk.
Indication: E.12: Unknown Disk
Meaning : This floppy disk is not formatted or the songs
stored on this floppy disk cannot be played in
the MT 300s.
106
Indication: E.13: Disk Ejected
Meaning : The floppy disk has been disconnected during
operation, repeat the procedure from the
beginning.
Indication: E.14: DamagedDisk
Meaning : This floppy disk is damaged and cannot be
used.
Indication: E.15: Can't Read
Meaning : This song cannot be read into the piano.
Indication: E.16: Can't Play
Meaning : The MT 300s cannot read the floppy disk
quickly enough. Press the Stop [
then press the Reset [
button to play the song.
Indication: E.17:Can't Edit
Meaning : Tones and other parameters of these music
files cannot be edited on the MT 300s. You can
only play back these music files.
Indication: E.30: Memory Full
Meaning : The internal memory capacity of the MT 300s
is full. If you save the song data then play, the
operation may be carried out successfully.
Indication: E.40: Buffer Full
Meaning : The MT 300s cannot deal with the excessive
MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the
MT 300s.
Indication: E.41: Comm.Error
Meaning : A MIDI cable or computer cable has been dis-
connected. Connect it properly and securely.
Indication: E.42: Can't Record
Meaning : An excessive amount of performance informa-
tion has been sent to the piano in one time and
therefore could not be recorded.
Indication: E.43: Comp.I/F Err
Meaning : The Computer Switch is set to a wrong posi-
tion or the computer is set wrongly. Switch off
the piano then set the Computer Switch to the
correct position and set the computer correctly
(p.14).
Indication: E.51: Memory Error
Meaning : There is something wrong with the system.
Repeat the procedure from the beginning. If it
is not solved after you have tried several
times, contact the Roland service center.
] button,
] button and Play [ ]