Copying Measures - Roland MT-300S Owner's Manual

Copying Measures

You can take a part of the performance and copy the same part and put it in a different
measure, or copy measures and place them in other parts. This is convenient when
you want to create a song where the same kind of phrases is repeated.
First... Select the Section to be Copied
fig.46-2_40
Phones
Press the [Song] button to display the Basic screen.
1.
Press the [Edit] button.
The Edit screen is displayed (p.15).
2.
Press the Beat [ ] or Tempo [ ] buttons until "Copy" appears in the
upper part of the screen.
3.
Press the [Transpose] button, and the following screen will appear:
fig.46-3_30
Track
4.
Using the Beat [ ] or Tempo [ ] buttons, move the cursor ( ) to the
"From" or "For."
Displayed
From
For
5.
Rotate the [Dial] to select the segment you want to copy.
For example, if you want to copy the interval from the beginning of Measure 5 to the
end of Measure 8, specify "From : 5" and "For : 4" to set the four-measure interval.
6.
Using the Beat [ ] or Tempo [ ] buttons, move the cursor ( ) to the
left side of the lower part of the screen.
7.
With the [Dial], select the track button number or part number to be
copied.
If you select "All," all parts in the same interval are copied to the same location.
If you selected a track button number, then only that track button can be copied.
Power Marker Clear Song
On Off
R
Volume
Description
Selects the number of the first measure to be copied.
Selects the number of measures to be copied. When "All" is select-
ed, everything from the measure selected with "From" to the end of
the song is selected.
2, 4, 6 3
Beat Tempo Transpose
Enter
1 2 3 4
Track
Count In Metronome
Editing Functions
Reverb
Edit
Sound
1 5, 7
79