Roland MT-300S Owner's Manual page 72

Recording Functions
Punching In and Out with the Buttons or the Pedal (M-Punch)
You can begin recording while a song is played back by either pressing the Rec [
button or the pedal at a designated point. Pressing the Rec [
again stops the recording, after which the MT 300s returns to playback mode.
You must change the pedal's function beforehand when you use it for recording. Please refer to
MEMO
"Changing the Pedal Functions" (p.98).
1.
When recording over only a certain part or parts, select such parts in
the 16-Track screen (p. 64).
2.
Press the Bwd [
back to begin.
3.
Press the Rec [ ] button, turning on its indicator.
The MT 300s is put into record standby mode.
4.
If you are using the Track buttons in rerecording, press the Track but-
tons for those tracks you want to record over.
5.
Press the Play [ ] button.
After two measures of count sound, playback begins.
6.
When you reach the point where you want recording to begin, press
the Rec [ ] button or depress the pedal.
7.
When you then reach the point where you want recording to stop,
press the Play [ ] button or depress the pedal once more.
When recording is stopped, the MT 300s reverts to playback mode.
8.
When you press the Stop [ ] button, playback of the song ceases.
72
] button to move to the point where you want play-
]
] button or pedal once