Roland MT-300S Owner's Manual page 80

Editing Functions
Second... Select the Copy Destination
fig.46-4_40
Phones
8.
With the cursor ( ) in the left side of the lower part of the screen,
press the Tempo [ ] button.
The following screen is called up.
fig.46-5_30
Pressing the Beat [
9.
Using the Beat [ ] or Tempo [ ] buttons, move the cursor ( ) to the
"To" or "Times."
Displayed
To
Times
10.
Rotate the [Dial] to select the location you want the measures copied
to.
For example, if you want to copy the four measures 5 to 8 to the interval from Measure
12 to Measure 23, you can specify "To : 12" and "Times : 3" to copy the four-measure
interval (three times).
In 7 above, if you chose the number of a Track button or "All," then go to 13 below.
11.
Using the Beat [ ] or Tempo [ ] buttons, move the cursor ( ) to the
left side of the lower part of the screen.
12.
Rotate the [Dial] to select the destination part number.
80
Power Marker Clear Song
On Off
R
Volume
Track
] button once returns you the previous screen.
Description
For selecting the number of the first destination measure.
If you select "End," the last measure of the song is selected.
For selecting the number of times the measures are copied.
9, 11
Beat Tempo
Enter
1 2 3 4
Track
Count In Metronome
8
Reverb
Sound
10, 12