LG 55UR80 0PSB Series Service Manual page 33

(23) Reverse LCM.
- Must be worked more than 2 people, one on the left and one on the right side with both hands reverse 180 degrees.
(24) Assemble the Panel SPCB L/R to the SPCB Holder.
- First, enter the upper part of the holder and then press the lower part of the holder to tighten the SPCB.
※ If there is a tape, attach the tape
(Only for application models)
- The attachment location should be checked
in advance when removing it.
* Attach the tape so that it doesn't
come into contact with the IC.
Insert the SPCB from the top of the holder.
From 1 to 2, in that order.
1
- 33 -
Copyright © LG Electronics Inc. All rights reserved.
Only for training and service purposes.
2