LG 55UR80 0PSB Series Service Manual page 32

▪ Precautions: Check that the sheet hanging hole on the upper/lower/left/right outer is properly seated on the cover Bottom Sheet
hanging.
OK
(20) Assembly the Guide Panel
- Press the guide panel 4 side down in the upper and lower direction in line with the cover Bottom face to tighten it, and then
tighten it in order of 2 and 3.
- Check Hook fastening. (Gap of Sheet and guide panel)
1
3
1
(21) Case Top Down assembly
- Insert Side direction.
(22) C/Top Lower side Screw 9ea assemble
- Screw Spec: M3*8 (Silver)
- Driver : M3 Screw Module Driver available.
* Caution : While Screw assembly, be care SPCB COF damage from driver Tip.
4
1
3
1
2
NO
※ If there's a tape on the panel, attach the tape. (Only for application models)
- Attach from panel side to cover bottom side (same left and right)
- 32 -
Copyright ©
Only for training and service purposes.
*Attach panel BM as a reference
for the lower edge surface
(at the end of the upper Pol).
 Tape should not be shown on the screen.
LG Electronics Inc. All rights reserved.