Table of Contents
Advertisement
(13) Release the Led array connector.
- Press the left/right locking part of the wire connector at the same time and lift it up and release it. (Total 7 EA)
(14) Disassemble the Led Array and Attach the New Led Array.
- Disassemble the Led Array Bar (Led Array and Cover Bottom are fixed with two-sided tape, so use appropriate force to cover
the Led Array.
Take it off and attach a new Led Array.
(15) Assembly of the Led array connector- Attach the connector on the wire ass'y by pushing it upward and downward.
(16) Attach the reflector sheet.
- Check Down side Sheet hanger position.
Locking part
Check Down side Sheet
hanger position
- 30 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Advertisement
Table of Contents
