LG 55UR80 0PSB Series Service Manual page 29

(10) Disassemble Sheet (1 sheet) and Diffuser Plate.
- Remove 1 sheets and one Diffuser Plate by lifting them at the same time.
- Assembly direction is divided by the chamfer shape of the Sheets/Diffuser Plate on the front left down side of SET. (other than
that, the corners are Rounded)
Sheet 1ea+
Diffuser Plate1ea
(11) Disassembly of 16 Support Diffuser Plates.
- Rotate the Support DP counterclockwise 45 degrees to align it to the assembly hole and lift it upwards to disassemble. (Total 16
EA)
(12) Disassemble the Reflector Sheet.
- As the reflector hole is fixed to the lens, disassemble the reflector by release the the fixation of lens from the end on the right.
a fixed part
SET Front direction
Left down
Chamfer
a fixed part
Diffuser Plate: Chamfer
- 29 -
Copyright © LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Sheet: Chamfer