♦
Check whether all the fastening elements are
correctly fitted .
♦
Make sure that the arrow showing the direction
of rotation (if any) on the cutting or rough grind-
ing discs (including diamond cutting discs) and
the direction of rotation of the appliance (arrow
showing the direction of rotation on the head)
match .
Switching on and off
Check the inserted tool before use . It must be
properly installed, may not be damaged or damp,
should have no cracks and turn freely . Carry out
a 60 second test run . Do not use non-circular or
vibrating tools . Be aware of unusual noises and
sparks . Check whether all the fastening elements
are correctly installed .
NOTE
►
Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece .
Switching on:
♦
Press the safety lock-out
♦
Then press the ON/OFF switch
Switching off:
♦
Let go of the ON/OFF switch
Turning the appliance handle
■
The handle
can be turned by 90° to the
right or left (see fig . A) .
■
This allows the ON/OFF switch
to the most suitable position depending on the
working conditions .
♦
Press the release button
ance handle
to the right or left .
♦
Allow the appliance handle
place .
■
12
│
GB │ IE │ NI │ CY
(see fig . E) .
.
.
to be moved
and turn the appli-
to click into
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any
work on the appliance.
■
Do not use any sharp objects to clean the
appliance. Never permit liquids to enter
inside the appliance. Otherwise the appliance
could be damaged .
■
The carbon brushes should only be replaced
by the service centre or an authorised specialist
workshop .
Apart from this, the appliance is maintenance-
free .
■
Clean the appliance regularly, preferably im-
mediately after completion of the work .
■
Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners which can attack
the plastic .
■
A vacuum cleaner is required for thorough
cleaning of the appliance .
■
Ventilation openings must never be obstructed .
■
Remove any sanding dust stuck to the appliance
with a brush .
NOTE
►
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline .
PWS 230 C3