GE SG 225 User Manual page 26

Home\Meter
INVERTER
f
L1
L2
L3
T
SYNCHRONIZED
Home\Meter
SYSTEM LOAD
L1 : 277 V
L2 : 277 V
L3 : 277 V
LOAD ON INVERTER
Home\Meter
SYSTEM LOAD
L1 : 44.8 kW
L2 : 35.8 kW
L3 : 26.9 kW
LOAD ON INVERTER
Home\Meter
MODULE LOAD
Total kVA
Percentage
LOAD ON INVERTER
Modifications reserved
OPM_SGS_USM_M22_M30_2US_V010.doc
60 Hz
277 V
277 V
277 V
+25° C
180.0 A 50 %
144.0 A 40 %
108.0 A 30 %
49.8 kVA PF +/-0.90
39.8 kVA PF +/-0.90
29.9 kVA PF +/-0.90
120 kVA
40%
Inverter data screen
f The output frequency of the Inverter.
L1
L2 Three-phase output voltage PHASE/NEUTRAL.
L3
T The temperature of the inverter bridge.
The synchronization status of the inverter with respect to
utility (SYNCHRONIZED / NOT SYNCHRONIZED).
Load on phases screen 1
... V Output voltage PHASE/NEUTRAL for each phase.
... A The output current as RMS values (for RPA: total
value of Parallel System).
... % The output load as percentage (for RPA: with
respect to the rated power of Parallel System).
The source of the power supplied to the load:
- DETOUR ON (Q2 close)
- Q1 OPEN
- LOAD OFF
- ON BATTERY
Load on phases screen 2
... kW The load active power (kW) (for RPA: total value of
Parallel System).
... kVA The load apparent power (kVA) (for RPA: total
value of Parallel System).
... PF The load power factor:
+ for inductive loads (lagging power factor).
- for capacitive loads (leading power factor).
The source of the power supplied to the load:
- DETOUR ON (Q2 close)
- Q1 OPEN
- LOAD OFF
- ON BATTERY
Module load screen
Total kVA
The load level in kVA (for RPA: only this unit).
Percentage
The load level as a percentage of the nominal rated load
(for RPA: only this unit).
The source of the power supplied to the load:
- DETOUR ON (Q2 close)
- Q1 OPEN
- LOAD OFF
- ON BATTERY
- LOAD ON INVERTER
- LOAD ON BYPASS
- LOAD ON BYPASS (eBoost)
- LOAD ON INVERTER
- LOAD ON BYPASS
- LOAD ON BYPASS (eBoost)
- LOAD ON INVERTER
- LOAD ON BYPASS
- LOAD ON BYPASS (eBoost)
Page 26/79
User Manual SG Series 225 & 300 UL S2