Table of Contents
Advertisement
6
LCD SCREEN
6.1
HOME SCREEN
The buttons perform the following functions:
METERING
METER
ALARMS
ALARM
MUTE
SETUP
SETUP
COMMANDS
CMDS
The LCD screen, after 5 minutes of inactivity, shuts down the backlight.
To reactivate it, it is sufficient to press any pushbuttons.
If the keypad remains inactive for 5 minutes or longer, during the viewing of a screen such as
MEASURES, ALARMS, SETUP or COMMANDS, the LCD screen returns automatically to the main screen.
It is possible to view any pushbutton functional description by pushing the button for more than 3
seconds.
Pushing the key "METER" (1
communication language for "ENGLISH".
Modifications reserved
OPM_SGS_USM_M22_M30_2US_V010.doc
Fig. 6.1-1 LCD display
View electric parameters values and statistics of use.
See Section 6.2.
Shows in chronological order, all the events occurred (alarms,
messages, commands, handling, etc.). See Section 6.3.
Key to reset general alarm and buzzer.
Allows the user to customize some UPS functions to specific
requirements and to view UPS identification data. See Section 6.4.
Allows the user to execute UPS operation commands.
See Section 6.5.
button) and "ALARM" (2
st
button) together automatically sets the LCD
nd
Page 23/79
User Manual SG Series 225 & 300 UL S2
Advertisement
Table of Contents
