Installing the coin cell battery
1. Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
3. Install the:
a.
cover
4. Follow the procedure in
Front Bezel
Removing bezel
1. Follow the procedure in
2. Remove the cover.
3. To remove the front bezel:
a. Lift the tabs to release the front bezel from the computer [1].
b. Remove the front bezel from the computer [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
13
Need help?
Do you have a question about the OptiPlex 3050 Small Form Factor and is the answer not in the manual?
Questions and answers