Controls and lights specifications
Feature
Specification
Power button
White light — Solid white light indicates power-on state; blinking white light indicates sleep state of the
light
computer.
Hard Drive
White light — Blinking white light indicates that the computer is reading data from or writing data to the
activity light
hard drive.
Back panel:
Link integrity
Green — a good 10 Mbps or 100 Mbps connection exists between the network and the computer.
light on
Orange — a good 1000 Mbps connection exists between the network and the computer.
integrated
network
Off (no light) — the computer is not detecting a physical connection to the network.
adapter :
Network activity
Yellow light — A blinking yellow light indicates that network activity is present.
light on
integrated
network adapter
Power supply
Green light — The power supply is turned on and is functional. The power cable must be connected to
diagnostic light
the power connector (at the back of the computer) and the electrical outlet.
Environmental specifications
Temperature
Specifications
Operating
0°C to 35°C (32°F to 95°F)
Storage
–40°C to 65°C (–40°F to 149°F)
Relative
Specifications
humidity
(maximum)
Operating
10 % to 90 % (non condensing)
Storage
5 % to 95 % (non condensing)
Maximum
Specifications
vibration:
Operating
0.66 GRMS
Storage
1.30 GRMS
Maximum
Specifications
shock:
Operating
110 G
Storage
160 G
Altitude
Specifications
(maximum)
Operating
–15.2 m to 30482000 m (–50 to 10,0006560 ft)
Storage
–15.20 m to 10,668 m (–50 ft to 35,000 ft)
Airborne
G2 or lower as defined by ANSI/ISA-S71.04-1985
contaminant level
68
Technical specifications
Need help?
Do you have a question about the OptiPlex 3050 Small Form Factor and is the answer not in the manual?
Questions and answers