Commissioning; User Profile - Daikin Altherma 3 H MT W Installer's Reference Manual

10 | Configuration

10.5.10 Commissioning

10.5.11 User profile

Installer reference guide
220
# Code
[9.P.3] [7-0A]
Main zone pump fixed PWM
The speed of the main zone pump can be fixed with this setting.
# Code
[9.P.4] [7-0B]
Mixing valve turning time
If a third party mixing valve is installed in combination with controller EKMIKPOA,
the valve turning time must be set accordingly.
For this setting, space heating/cooling and tank operation MUST be off:
[C.2] Space heating/cooling=0 (Off) and [C.3] Tank=0 (Off). See
4
"10.5.12 Operation" [ 221].
# Code
[9.P.5] [7-0C]
Overview
The following items are listed in the submenu:
A
Information
Installer settings

Commissioning

User profile

Operation
About commissioning
See: "11 Commissioning" [
[B] User profile: See
B
Installer settings
Commissioning
User profile
Operation
Malfunctioning
Add zone pump fixed PWM: Fixed pump
speed for additional (direct) zone.
▪ 20~95% (default: 95)
Main zone pump fixed PWM: Fixed pump
speed for main (mixed) zone.
▪ 20~95% (default: 95)
Mixing valve turning time: Time in
seconds for the mixing valve to turn from one
side to the other.
▪ 20~300 sec (default: 125)
[A] Commissioning
[A.1] Operation test run
[A.2] Actuator test run
[A.3] Air purge
[A.4] UFH screed dryout
4
228]
"To change the user permission
Description
Description
Description
4
level" [ 131].
EPRA08~12EAV3+W1 + ETBH/X12EF6V+9W
Daikin Altherma 3 H MT W
4P634885-1 – 2021.03