Page 3
Flyingvoice does not provide any warranty and is subject to change without notice. All risks other than risks caused by use of the information are borne by the recipient. In no event, even if Flyingvoice has been suggested the occurrence of damages that are direct,...
Page 4
Address: 1801-1802, Building 1, Chongwen Park, Nanshan Zhiyuan, Nanshan District, Shenzhen, China Hereby, Flyingvoice Network Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU A copy of the declaration of conformity can be obtained with this user manual; this product is not restricted in the EU.
Page 5
GNU GPL INFORMATION Flyingvoice phone firmware contains third-party software under the GNU General Public License (GPL). Flyingvoice uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and conditions of the license.
Table of Contents About This Guide ......................... 6 Chapter 1 Introduction ......................7 1.1 Hardware Overview ....................7 P10W Hardware ....................7 1.2 LED Indicator ......................8 Power LED Indicator ..................... 8 1.3 Screen and Icons....................9 Idle Screen ......................9 Calls Screen ......................
Page 7
Diverting Calls to a Contact................. 26 3.9 Call Waiting ......................26 Phone interface configuration ................26 Web interface configuration ................26 3.10 Transferring Calls ....................27 Performing a Blind Transfer ................27 Performing an Attended Transfer ................ 27 Flyingvoice Network Technology Co., Ltd. II/IV...
Page 8
Saving a History Record to Local Directory ............39 Saving a History Record to Blacklist ..............39 Deleting History Records ..................39 Chapter 5 Customizing Your Phone .................. 41 5.1 Basic Setting ......................41 Backlight ......................41 Language ......................42 Flyingvoice Network Technology Co., Ltd. III/IV...
Page 9
5.2 Audio Settings ...................... 43 Adjusting the Volume ..................43 Setting the Ring Tone ..................44 Chapter 6 Maintaining Your Phone ..................45 6.1 Rebooting Your Phone ..................45 6.2 Resetting to Factory Settings ................45 Flyingvoice Network Technology Co., Ltd. IV/IV...
About This Guide About This Guide Thank you for choosing Flyingvoice P10W IP phone, which delivers the industry’s leading HD audio quality and a wide range of business telephony features, such as Call Hold, Call Transfer, Busy Lamp Field, Call Recording, Paging and Conference over an IP network. Meanwhile, it features a compact appearance, robust performance and cost efficiency for daily desktop voice communications.
This chapter provides the overview of phone hardware and screen layout, and how to navigate your phone for the best performance. Topics Hardware Overview LED Indicator Screen and Icons Entering Characters 1.1 Hardware Overview Topics P10W Hardware P10W Hardware Flyingvoice Network Technology Co., Ltd.
Chapter 1 Introduction The main hardware components of the P10W IP phone are described as follows. Item Description Handset Handset to pick up and answer call Shows information about your phone, such as calls, messages, soft keys, time Phone Screen and date Access the function displayed on the screen above the soft keys.
1. Status Bar: Display the default account, feature status icons, and the time. The status icons are displayed when features are activated. 2. Line Keys: Display the information associated with the line keys and feature keys on the phone. 3. Soft Keys: Display the information associated with the feature keys. Flyingvoice Network Technology Co., Ltd.
You can use the keypad keys on your phone to enter or update field information. The following table describes how to enter different characters using the keypad keys. Task Action Switch input modes Press the ABC, abc, Ab2, 2aB, or 123 soft key to switch the input modes. Flyingvoice Network Technology Co., Ltd.
Page 16
In 123 mode, you can press the * key to choose the following special characters: .*:/@[]. Insert space Select ABC, abc, 2aB mode, press the 0 key. Delete one or more Position the cursor to the right of the character, and select the Delete soft key. characters Flyingvoice Network Technology Co., Ltd.
Chapter 2 Getting Started Chapter 2 Getting Started This chapter describes the introductory operation of the P10W phone and covers the For more information and help, please contact us. Topic Phone initialization Phone Status Basic network settings Wireless Network Registration 2.1 Phone initialization...
4. Press the OK to save the operation Incorrect network settings may cause the network to be unavailable and may also have an impact on the performance of the network. To learn more about the parameters, please consult your system administrator. Flyingvoice Network Technology Co., Ltd.
Get the password of the wireless network from your system administrator. Make sure that the Wi-Fi mode is activated. Procedure 1. Navigate to Menu > Basic > Wi-Fi. 2. Press the Available Network(s). 3. Optional: To research the available network, select Scan. Flyingvoice Network Technology Co., Ltd.
Note: When the phone uses the Wireless connection the Ethernet cable connection in the same time, the Wireless connection has the higher priority. Procedure 1. Navigate to Menu > Basic > Wi-Fi. 2. Select Off from the Wi-Fi field. 3. Select OK. Flyingvoice Network Technology Co., Ltd.
Usually, the system administrator will pre-configure the relevant parameters and deploy all phones centrally, in this case, the phones are usually already registered with accounts. The P10W IP phone supports 2 account registrations. If the phone is not registered, you need to register it manually.
Page 22
1. Click SIP Account->Line x, drop down and select Account Disable Tips Incorrect network settings may cause the network to be unavailable and may also have an impact on the performance of the network. To learn more about the parameters, please consult your system administrator. Flyingvoice Network Technology Co., Ltd.
Start typing a phone number. ⚫ Select the desired line key. ⚫ Pick up the handset, press the Speakerphone key or the HEADSET key 2. Enter a number or select a contact. 3. Select Send. Flyingvoice Network Technology Co., Ltd.
3.1.4 Placing a Call from the Directory You can place a call to a contact directly from your directory. Procedure 1. Select Directory or navigate to Menu > Directory > Local Contacts. 2. Select the desired contact group or All Contacts. Flyingvoice Network Technology Co., Ltd.
You can answer a call when there is already an active call on your phone. When you are in an active call and an incoming call arrives on the phone, a call waiting tone beeps, and the incoming call information is displayed. Flyingvoice Network Technology Co., Ltd.
1. Navigate to Phone-> Preferences-> Miscellaneous->Auto Answer All Phone Number -> Save & apply 3.3 Disabling Call Waiting If the call waiting feature is disabled, when there is already a call, the new incoming call will be rejected automatically. Procedure Flyingvoice Network Technology Co., Ltd.
Tip: To deactivate DND quickly, press the DND soft key when the phone is idle. 3.5 Ending Calls You can end the current call at any time. Procedure 1. Do one of the following: Flyingvoice Network Technology Co., Ltd.
If multiple calls are placed on hold, select the desired call first. Tip: When you have multiple calls on the phone and the current call is active, you can select Swap to swap to the held call. Flyingvoice Network Technology Co., Ltd.
5. Optional: Enter the always/busy/no answer forward on code or off code respectively in the On Code or Off Code field. 6. Select OK. The call forward icon appears in the status bar. Deactivating Call Forward Flyingvoice Network Technology Co., Ltd.
1. Press Menu -> Features -> Call Waiting -> Call Waiting Settings, click Switch key, select 2. Press the OK key to save the operation Web interface configuration Procedure 1. SIP Account->Line x -> Call Waiting, turn on call waiting, save and apply. Flyingvoice Network Technology Co., Ltd.
Avoid tapping or rustling papers near the microphone. ⚫ Speak in your normal voice without shouting. Tip: Check with your system administrator to find out if the local conference is enabled on your phone. Topics Flyingvoice Network Technology Co., Ltd.
2. Press the navigation key up or down to select a held call. 3. Press Resume. Ending a Conference Call When you end the conference call, the other parties drop the call. Procedure 1. Select End Call (End C). Flyingvoice Network Technology Co., Ltd.
Then log into the phone's web interface, go to Phone->Line key page, type select Paging, enter the group number into the value, then click the Save button. 3. After that, you can press the configured programable key to use the function. Using Paging Flyingvoice Network Technology Co., Ltd.
3. Follow the voice prompt to listen to your voice mails. Tip: When the phone prompts that the phone receives a new voice mail, you can press the Connect soft key to dial out the voice mail access code directly. Flyingvoice Network Technology Co., Ltd.
"Fail to send " is prompted, it means the recipient does not exist or other errors, the text message will be saved in the Outbox and can be changed and resend. Viewing text messages Flyingvoice Network Technology Co., Ltd.
Delete to delete the message, or press the Option in the Sentbox message list to select Delete or Delete All. Save Text message Save to outbox: When sending a text message, it will be automatically saved to the outbox after sending failure. Procedure Flyingvoice Network Technology Co., Ltd.
LCD interface, and the power indicator slowly flashes red. When all voice messages are checked or deleted, the voice icon disappears and the power indicator turns off. Tip: Not all servers support the MWI function. For more information, please consult your system administrator. Option Description Flyingvoice Network Technology Co., Ltd.
Managing the Local Directory Groups Managing the Local Directory Contacts Moving a Local Directory Contact to Blacklist Searching for Contacts Managing the Local Directory Groups You can manage the Local Directory groups when the phone is idle. Flyingvoice Network Technology Co., Ltd.
Page 39
The phone prompts you whether to delete the group. 4. Select OK. Managing the Local Directory Contacts You can manage the Local Directory contacts when the phone is idle. Topics Adding Contacts Viewing Contacts Editing Contacts Deleting a Contact Deleting All Contacts Flyingvoice Network Technology Co., Ltd.
Page 40
4. Select OK. Deleting All Contacts You can delete all contacts from the Local Directory. Procedure 1. Select Directory or navigate to Menu > Directory > Local Contacts. 2. Select the desired contact group or All Contacts. Flyingvoice Network Technology Co., Ltd.
1. Navigate to Menu > Directory > Blacklist. 2. Select Add. 3. Enter the blacklist contact’s information. 4. Select Save. Viewing Blacklist Contacts You can view the blacklist contacts from the Blacklist on your phone. Procedure Flyingvoice Network Technology Co., Ltd.
Page 42
You can move a blacklist contact to a Local Directory. Incoming calls from this contact will not be rejected automatically. Procedure 1. Navigate to Menu > Directory > Blacklist. 2. Select the desired contact, and then select Add to Contact list. The phone prompts you whether to move to contact. Flyingvoice Network Technology Co., Ltd.
You can prevent someone from calling you again by saving a history record to Blacklist. Procedure 1. Select History. 2. Select the desired list. 3. Select the desired entry, and select Option > Add to Blacklist. 4. Edit the contact information. 5. Select OK. Deleting History Records Flyingvoice Network Technology Co., Ltd.
Page 44
You can delete all call records from the call history list. Procedure 1. Press History. 2. Select the desired list. 3. Select the desired entry, and select Delete All. The phone prompts you whether to delete all the records. 4. Select OK. Flyingvoice Network Technology Co., Ltd.
When the phone is in Idle, the screen brightness can be adjusted in 8 levels. Procedure 1. Navigate to Menu > Basic > Display > Active Level or Backlight Idle Intensity. 2. Select the desired level from the corresponding field. Flyingvoice Network Technology Co., Ltd.
Changing the Administrator Password By default, you need input administrator password to access the Advanced setting menu. The default password is “admin”. For security reasons, you should change the default password as soon as possible. Procedure Flyingvoice Network Technology Co., Ltd.
You can change the basic audio settings on your phone. Topics Adjusting the Volume Setting the Ring Tone Adjusting the Volume You can adjust the volume of the ringer, media, and the audio during a call. Flyingvoice Network Technology Co., Ltd.
1. Select Directory or navigate to Menu > Directory> Local Contacts. 2. Select the desired contact group or All Contacts. 3. Choose the desired contact, and select Option > Detail. 4. Select the desired ring tone from the Ring Type field. 5. Select Save. Flyingvoice Network Technology Co., Ltd.
The phone prompts you whether to reset the setting. 3. Select OK. The phone begins resetting. Tip: Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully. Flyingvoice Network Technology Co., Ltd.