Linking The Incomplete Clips [Cx10] - Panasonic AG-CX6 Operating Instructions Manual

Linking the incomplete clips [CX10]

The linked P2 clips recorded over multiple memory cards may become incomplete clips due to being copied separately from each memory card.
These can be restored to original linked clips by using the link function.
P2 clips with a recording format of AVC-I100 or AVC-I50 can be linked.
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
2
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
3
Select the [THUMBNAIL] menu → [CLIP] → [RE-CONNECT].
4
Select [SELECT].
The thumbnail screen is displayed.
5
Select the clip to link in the thumbnail screen.
is displayed next to the thumbnail number on the selected clip.
6
Select [SET].
≥ This can also be selected by pressing and holding the multidial.
7
Select [SET] when the confirmation message is displayed.
This starts linking of the clip.
8
When the completion message is displayed, select [
@ NOTE
0 Even though some clips are reconnected, [
0 Linking is not possible when the card with the clips to link is write protected.
0 When a clip with proxy is re-connected, the proxy file is re-connected along with it.
Chapter 6 Playback — Thumbnail operation
]
] will remain displayed when all the clips constituting the original linked clip are not present.
- 152 -