Table of Contents
Advertisement
Alert
Screen display
Camera image screen
[SIMUL REC WARNING <SLOT 1>]/
[SIMUL REC WARNING <SLOT 2>]
[BACKGROUND REC WARNING
<SLOT 1>]/[BACKGROUND REC
WARNING <SLOT 2>]
[REINSERT OR CHECK CARD
<SLOT 1>]/[REINSERT OR CHECK
CARD <SLOT 2>]
[FORMAT ERROR CARD <SLOT 1>]/
[FORMAT ERROR CARD <SLOT 2>]
[NOT SDXC CARD <SLOT 1>]/
[NOT SDXC CARD <SLOT 2>]
[INCOMPATIBLE CARD <SLOT 1>]/
[INCOMPATIBLE CARD <SLOT 2>]
(For the
)
CX10
[DIR NG CARD <SLOT 1>]/
[DIR NG CARD <SLOT 2>]
(For the
)
CX10
[RUN DOWN CARD <SLOT 1>]/
[RUN DOWN CARD <SLOT 2>]
(For the
)
CX10
[SD CARD <SLOT 1>]/
[SD CARD <SLOT 2>]
[BACKUP BATT EMPTY]
Chapter 10 Notes — Warning system
Description
An error has occurred in one of the memory cards during
simultaneous recording.
Recording has been attempted while the number of clips
has exceeded the limit on one of the memory cards during
simultaneous recording.
An error has occurred in one of the memory cards during
background recording.
Recording has been attempted while the number of clips
has exceeded the limit on one of the memory cards during
background recording.
The memory card cannot be recognized properly because
a recording medium which is not supported has been
inserted or there is dirt on the terminal of the memory card.
A memory card with management information out of
specifications has been inserted.
(Include when the system frequency (59.94 Hz system or
50.00 Hz system) for the AVCHD format of the memory
card is different from the setting in the [SYSTEM] menu →
[FREQUENCY])
When [FILE FORMAT] is set to MOV format/MP4 format,
there is a memory card inserted to which MOV format/MP4
format data cannot be recorded.
A memory card that may not be able to record due to slow
writing speed has been inserted.
A microP2 card with inappropriate directory placement is
inserted when [FILE FORMAT] is set to P2 format.
A microP2 card exceeding the specified number of
overwrites is inserted.
SDHC/SDXC memory card is inserted when [FILE
FORMAT] is set to P2 format.
A drop in the voltage of the backup battery for the internal
clock was detected when the power button was pressed to
turn the power on.
≥ Recording to the other memory card will continue.
≥ Recording to the other memory card will continue.
≥ [SIMUL REC WARNING <SLOT 1>] [<OVER MAX NUM.
OF CLIPS>]/[SIMUL REC WARNING <SLOT 2>]
[<OVER MAX NUM. OF CLIPS>] is displayed in the
warning display field of the STATUS screen for the mode
check.
≥ Replace the memory card or delete unnecessary clips.
≥ Recording to the other memory card will continue.
≥ Recording to the other memory card will continue.
≥ [BACKGROUND REC WARNING <SLOT 1>] [<OVER
MAX NUM. OF CLIPS>]/[BACKGROUND REC
WARNING <SLOT 2>] [<OVER MAX NUM. OF CLIPS>]
is displayed in the warning display field of the STATUS
screen for the mode check.
≥ Replace the memory card or delete unnecessary clips.
≥ Check the memory card that is inserted.
≥ Insert the memory card again if displayed when inserting
a memory card.
≥ Insert a memory card that can record.
≥ The system frequency information for the AVCHD format
is confirmed at the time of formatting or at the first
recording.
≥ Insert a SDXC memory card or 64 GB microP2 card.
≥ The current operation will continue.
≥ Use a memory card with sufficient writing speed.
≥ The current operation will continue.
≥ Take a backup of the card immediately, and use again
after formatting.
≥ The current operation will continue.
≥ Replacement of the microP2 card is recommended.
≥ The current operation will continue.
≥ Recording to a microP2 card is recommended.
≥ The current operation will continue.
≥ Set the date/time again after charging the built-in battery.
- 195 -
Behavior and cause
Advertisement
Table of Contents
